Sini Beanie English PDF pattern

€7.65

A cozy, bulky, and minimalist hat with a single-folded brim for extra warmth and wind protection in cold weather.

Designed by combining different yarn weights and textures to create a dense, textured fabric simulating a shearling look.

The beanie is worked seamlessly in the round from the bottom up, beginning with a deep ribbed brim that is inward. The crown is then shaped using decreases to close the top. It is a unisex design suitable for women, men, and children.

The model wears Size 2 with a head circumference of approximately 55 cm / 21.75”.

LEVEL

Beginner (1/3)

YARN

2 (2) 2 skeins of Teddy Dear by Gepard (50 g = 75 m / 82 yds) (60% Merino Wool, 40% Alpaca).

1 (2) 2 skein(s) of Pura Lana by Gepard (50 g = 115 m / 126 yds) (50% Alpaca, 50% Merino Wool).

1 (1) 1 skein of Kid Seta by Gepard (25 g = 210 m / 230 yds) (70% Super Kid Mohair, 30% Silk ).

The beanie is worked holding these 3 strands of yarn together.

Alternative yarn

1 (2) 2 skein(s) of Como grande Bouclé by Lamana (50 g = 90 m / 98 yds) (100% Merino Superfine).

1 (1) 2 skein(s) of Bergamo by Lamana (50 g = 130 m / 142 yds) (75% Merino Superfine, 25% Baby Alpaca).

1 (1) 1 skein of Premia by Lamana (25 g = 300 m / 328 yds) (60% Super Kid Mohair, 40% Silk).

or

3 (3) 4 skein(s) of Bouclé mohair by Mohair by Canard (50 g = 85 m / 92 yds) (78% Mohair, 13% Merino and 9% Nylon), held double.

1 (1) 1 skein of Double Kid mohair by Mohair by Canard (50 g = 175 m / 191 yds) (35% Merino Wool, 65% Kid Mohair)

1 (1) 1 skein of Brushed Lace by Mohair by Canard (25 g = 210 m / 229 yds) (72% Fine Kid Mohair, 28% Mulberry Silk)

NEEDLES

6 mm / US 10 circular needle cable length 40 or 60 cm / 16 or 24” cable.

6 mm / US 10 circular needle cable length 80 cm (magic loop) or DPN’s for the crown shaping.

5 mm / US 8 circular needle, cable length 40 or 60 cm / 16 or 24” for the ribbing.

GAUGE

14 sts x 17 rows = 10 x 10 cm /4 x 4” on 5 mm / US 8 needle in rib worked in the round.

Note: Gauge is measured on the rib.

15 sts x 18 rows = 10 x 10 cm /4 x 4” on 6 mm / US 10 needle in stockinette st in the round.

SIZES

1 (2) 3

Actual head circumference: 51–53 (54–56) 57–59 cm/ 20.5–21.25 (21.5–22.5) 22.75–23.5”.

Finished head circumference: 51.5 (54.5) 57 cm/ 20.5 (21.75) 22.75”.

Length from top of crown to earlobe: 19 (22) 23 cm/ 7.5 (8.75) 9.25”.

Length brim: 8 (10) 10 cm/ 3.25 (4) 4”.

A cozy, bulky, and minimalist hat with a single-folded brim for extra warmth and wind protection in cold weather.

Designed by combining different yarn weights and textures to create a dense, textured fabric simulating a shearling look.

The beanie is worked seamlessly in the round from the bottom up, beginning with a deep ribbed brim that is inward. The crown is then shaped using decreases to close the top. It is a unisex design suitable for women, men, and children.

The model wears Size 2 with a head circumference of approximately 55 cm / 21.75”.

LEVEL

Beginner (1/3)

YARN

2 (2) 2 skeins of Teddy Dear by Gepard (50 g = 75 m / 82 yds) (60% Merino Wool, 40% Alpaca).

1 (2) 2 skein(s) of Pura Lana by Gepard (50 g = 115 m / 126 yds) (50% Alpaca, 50% Merino Wool).

1 (1) 1 skein of Kid Seta by Gepard (25 g = 210 m / 230 yds) (70% Super Kid Mohair, 30% Silk ).

The beanie is worked holding these 3 strands of yarn together.

Alternative yarn

1 (2) 2 skein(s) of Como grande Bouclé by Lamana (50 g = 90 m / 98 yds) (100% Merino Superfine).

1 (1) 2 skein(s) of Bergamo by Lamana (50 g = 130 m / 142 yds) (75% Merino Superfine, 25% Baby Alpaca).

1 (1) 1 skein of Premia by Lamana (25 g = 300 m / 328 yds) (60% Super Kid Mohair, 40% Silk).

or

3 (3) 4 skein(s) of Bouclé mohair by Mohair by Canard (50 g = 85 m / 92 yds) (78% Mohair, 13% Merino and 9% Nylon), held double.

1 (1) 1 skein of Double Kid mohair by Mohair by Canard (50 g = 175 m / 191 yds) (35% Merino Wool, 65% Kid Mohair)

1 (1) 1 skein of Brushed Lace by Mohair by Canard (25 g = 210 m / 229 yds) (72% Fine Kid Mohair, 28% Mulberry Silk)

NEEDLES

6 mm / US 10 circular needle cable length 40 or 60 cm / 16 or 24” cable.

6 mm / US 10 circular needle cable length 80 cm (magic loop) or DPN’s for the crown shaping.

5 mm / US 8 circular needle, cable length 40 or 60 cm / 16 or 24” for the ribbing.

GAUGE

14 sts x 17 rows = 10 x 10 cm /4 x 4” on 5 mm / US 8 needle in rib worked in the round.

Note: Gauge is measured on the rib.

15 sts x 18 rows = 10 x 10 cm /4 x 4” on 6 mm / US 10 needle in stockinette st in the round.

SIZES

1 (2) 3

Actual head circumference: 51–53 (54–56) 57–59 cm/ 20.5–21.25 (21.5–22.5) 22.75–23.5”.

Finished head circumference: 51.5 (54.5) 57 cm/ 20.5 (21.75) 22.75”.

Length from top of crown to earlobe: 19 (22) 23 cm/ 7.5 (8.75) 9.25”.

Length brim: 8 (10) 10 cm/ 3.25 (4) 4”.

Note that the download file will expire within 24 hours of your first access.